Round ERW tubing for conveyor rollers and material handling equipment — 1.375″–2.5″ OD, 9–16 ga, in hot rolled, HRPO, and galvanized. Dedimpled, clean IDs, inspected welds, mill-direct from Mansfield, Ohio.
A conveyor roll spins for years on its bearings — a dimpled end, a dirty ID, or an open weld seam is a rejected part. Our conveyor customers spec dedimpled ends, cleaned IDs, and weld inspection on every bundle, and those requirements are held run after run across whole roller families: the same OD in galvanized and HRPO, gage by gage.
Beyond rollers: frame and guard tube in square and rectangular profiles, with release-scheduled shipping to match your production cadence. Spec: ASTM A513 — see round tubing sizes and tolerances.
Round ERW carbon steel tube — typically 1.375″ to 2.5″ OD in 9–16 ga — in hot rolled, HRPO, or galvanized, manufactured to ASTM A513. Roller manufacturers order the same OD in multiple material/gage pairs to build out a roller family, and we run all of them on the same tooling.
The requirements conveyor customers put on our spec sheets — dedimpled ends, cleaned IDs, and weld-seam inspection with bundles stacked welds-up so every row can be checked — are held on every run. A dimple or open weld in roller tube is a rejection, so those checks are the spec, not an extra.
Yes — the same roller sizes run in galvanized for exposed or washdown service and in HRPO or hot rolled for painted or indoor rollers. Many customers order matched galvanized/HRPO pairs at the same OD.
A truckload — roughly 45,000 lb. Send your OD, gage, material, and lengths with your RFQ and we'll confirm, along with current lead time.
OD, gage, material, lengths, and annual usage — we'll come back with pricing and a real lead time.
Request a Quote
